Advertisement
NOTICE
Worn, damaged or missing seals must be replaced immediately.
Replacement seals are available for purchase from Siemens. For more information,
contact a Siemens Sales representative.
There are three ways to determine if a security seal has been tampered with:
•
The seal is cut or torn
•
A pattern is left on the device when the top layer of the seal is removed
•
Residue left by the seal is visible on the device under ultra-violet light
For information about the placement of security seals, refer to the
RUGGEDCOM RS900F FIPS 140-2 Non-Proprietary Security Policy [https://support.in-
dustry.siemens.com/cs/ww/en/view/109757984]
RUGGEDCOM RS900F
Installation Manual, 02/2020, C79000-G8976-1350-04
All manuals and user guides at all-guides.com
1.6 Tamper-Evident Security Seals
RUGGEDCOM
.
Introduction
5
Advertisement
Need help?
Do you have a question about the SIMATIC NET RUGGEDCOM RS900F and is the answer not in the manual?
Questions and answers