Panasonic WV-SFV110 Installation Manual page 35

Resolution:
H.264
JPEG (MJPEG)
Image compression method:
JPEG (MJPEG)
SFV130
2 mega pixel [16:9]
1920×1080, 1280×720, 640×360, 320×180, 160×90
*"1920x1080"mode is only available for H.264(1), H.264(2).
2 mega pixel [4:3]
1600×1200, 1280×960, 800×600, VGA, 400×300, QVGA,
160×120
*"1600x1200"mode is only available for H.264(1), H.264(2).
3 mega pixel [16:9]
2048×1536*
160×120
*"2048x1536"mode is only available for H.264(1), H.264(2).
SFV110
1.3 mega pixel [16:9]
1280×720, 640×360, 320×180, 160×90
1.3 mega pixel [4:3]
1280×960, 800×600, VGA, 400×300, QVGA, 160×120
2
H.264* Transmission priority:
Constant bit rate/ Variable bit rate/ Frame rate/ Best effort/
Advanced VBR
Frame rate:
<When Variable bit rate, Frame rate, or Advanced VBR is selected>
1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*
* The frame rate is limited to "bit rate". When a value with an
asterisk (*) is selected, the actual frame rate may be lower that
the value selected.
Max bit rate (per client):
64 kbps/ 128 kbps*/ 256 kbps*/ 384 kbps*/ 512 kbps*/
768 kbps*/ 1024 kbps*/ 1536 kbps*/ 2048 kbps*/ 3072 kbps*/
4096 kbps*/ 6144 kbps*/ 8192 kbps*/ 10240 kbps*/
12288 kbps*/ 14336 kbps*/ 16384 kbps*/ 20480 kbps*/
24576 kbps*/ 30720 kbps*/ 40960 kbps*
* The available range of the H.264 bit rate varies depending on the
setting selected for "image capture size".
Image quality:
<When Constant bit rate or Best effort is selected>
Low/ Normal/ Fine
<When Variable bit rate is selected>
0 Super fine/1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Transmission type:
Unicast/ Multicast
Image quality: 0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/
Transmission type: Pull/ Push
Refresh interval: 0.1 fps – 30 fps
1
,1280×960, 800×600, VGA, 400×300, QVGA,
9 Low (10 steps: 0-9)
(JPEG frame rate will be restricted when
displaying both JPEG and H.264 images.)
35