Panasonic WV-SFV110 Installation Manual page 31

About the indicator
The indicator will light or blink as follows depending on the camera status.
Indicator type and operation state
ACT indicator
When data is being sent via the network camera
LINK indicator
When the camera is able to communicate with the con-
nected device
SD CARD indicator
• When the camera is being started
• When an SD memory card is recognized normally
• When the SD memory card slot is not used or if an SD
memory card error is detected after start-up
SD CARD indicator
Change of indicator indication
Blinks green (accessing)
Lights orange
Lights red
Lights red  Lights off
Lights red  Lights off  Lights red
ACT indicator
LINK indicator
31