Panasonic WV-SFV110 Installation Manual page 24

Using the mount bracket
■
1
Connect the conduit attachment (locally procured) to the conduit.
2
Secure the mount bracket (accessory) to the conduit attachment with the attachment for female
thread (locally procured).
3
Mount the mount bracket to either a ceiling or a wall. (3 screws (M4) (locally procured))
(Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more.)
IMPORTANT:
• Make sure to use ø10 mm {13/32 inches} flat washers (locally procured).
Attachment for
female thread
4
Secure the camera to the mount bracket with 3 fixing screws (accessory).
(Recommended tightening torque: 1.4 N·m {1 lbf·ft})
■
Ceiling
24
flat washers
(locally procured)
Fixing screws
(locally procured)
Camera
Fixing screws
accessory
( )
Mount bracket Ethernet
(accessory) cable
Conduit Conduit
attachment
■
Wall
Fixing screws
( accessory )
Cable
access hole