Advertisement
M S-7100 ATX M ainboard
Create RAID set is used to create a new legacy RAID Set or for allocating legacy
spare drives.
Delete RAID set is used to delete a legacy RAID Set or to deallocate a legacy
spare drive.
Rebuild RAID 1 Set is used to initiate the rebuild of a RAID 1 set after, for
example, a drive in the Group has been replaced.
Resolve Conflicts is used to automatically find the member drives of a RAID set
which has been disrupted (physical drives
swapped around, for example) and restore the Set to proper operation.
Low Level Format allows a single drive to have its data completely wiped out.
Drives assigned to Sets or allocated as spares
cannot be low level formatted.
Logical Drive Info shows the current configuration of each RAID set, allocated
spare, and unallocated physical drive attached
to the SATA host adapter.
These operations are detailed in the pages that follow.
Help Window
This window displays context-sensitive help and status messages.
Physical Drive Information
This window displays the model number and capacities of the drives physically
attached to the SATA host adapter.
Logical Drive Information
This window displays all logical drives connected to the controller. The upper part
lists RAID sets and JBOD drives reported to the system BIOS. The lower part lists
spare drives, reserved drives, conflict drives, and invalid drives not reported to
the system BIOS.
Command Line
The bottom line of the display lists the currently active command keys:
Up and Down arrows select the menu item or action
ESC takes the user to the previous menu
Enter selects the highlighted choice
Ctrl-E exits the utility
Other keys may be active depending upon the currently selected action.
7 - 4
Advertisement
