Advertisement
M S-7100 ATX M ainboard
M SI Feature
enable this feature, only PCs with MAC address located in Association Control List
can connect to the wireless LAN.
M AC Address
MAC stands for Media Access Control. A MAC address is the hardware address of
a device connected to a network.
Security
This option allows you to enable/disable the authentication function.
Authentication
Open:
Communicates the key across the network.
Shared: Devices must have identical W EP settings to communicate.
WLAN Card Mode
Click on "Setting" button of the WLAN Card Mode for the WEP status of your APs.
If the AP you are selecting (the highlighted one) is not encrypted (Disabled shown in
the Encryption column), the screen will display as below. You can click "Connect"
to make connection to that AP, click "Cancel" to close this dialogue box, or click
"Refresh" button to update the available W LAN connections.
If the network you are selecting is encrypted (WEP shown in the Encryption column),
the screen will display as below. You need to enter the correct W EP key defined by
AP in the specified WEP Key 1~4 fields to make the connection.
4-8
Advertisement
