Advertisement
Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the W indows CD, and the
W indows Setup program starts.
2. Press F6 and wait for the W indows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The
W indows Setup screen appears as below:
MSI Reminds You...
Please follow the instruction below to make an nVIDIA Serial ATA RAID
driver for yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Ignore the Setup screen and use "Explorer" to browse the CD.
3. Co py a ll t he c on te nts ( in c lud in g th e s ub -f olde rs ) in t he
\\nVidia\System\CK804\IDE\Win2k-XP\ to a formatted floppy
disk.
4. The driver disk for nVIDIA Serial ATA driver is done.
(2) Select "NVIDIA RAID CLASS DRIVER" and then press Enter.
(3) Press S again at the Specify Devices screen, then press Enter.
(4) Select "NVIDIA NForce Storage Controller" and then press Enter. The follow-
ing W indows Setup screen appears listing both drivers:
nVIDIA RAID Introduction
6-7
Advertisement
