Copying Information To A File - Ricoh AP4510 Supplementary Manual

Note
❒ Leave the user name and password blank, and then press the { { { { RETURN} } } } key.
❒ "-" indicates the standard output. It will be displayed on screen if the stand-
ard output has not been specified.
Parameters that can be used with rsh, rcp and ftp:
Parameter
stat
info
prnlog
syslog

Copying Information to a File

Use the rcp or ftp command to copy information about the specified parameters
to a file.
You can use these commands for BSD and System V UNIX.
Note
❒ The same parameters are used as those above.
% rcp host_name:parameter file_name
% ftp host_name
User: user_name
password:
ftp> get parameter file_name
Note
❒ Leave the user name and password blank, and then press the { { { { RETURN} } } } key.
Information returned
Status of the printer.
Information about print jobs.
Information about the paper tray, output tray and printer language.
Record of the last 16 jobs printed.
Record of messages about the Network Interface Board.
Printer Status
1
15