Output Tray - Ricoh AP4510 Supplementary Manual

UNIX Configuration

Output Tray

Select the output tray.
1
outbin=value of output tray
Limitation
❒ Only the installed output trays are available.
Note
❒ The output tray value corresponds to the ID number of the output tray which
is obtained from the printer information (e.g. info command in ftp, info com-
mand in telnet. For more information about telnet, see the Printer Reference.).
❒ You can select an output tray using alphabet letters instead of the ID number
of the output tray. For more printer information, see the Printer Reference.
Output Tray
Standard Tray
Finisher Tray
Finisher Upper Tray
Finisher Lower Tray
Mailbox
*1
Finisher 1000 installed
*2
Finisher 3000 installed
*3
Mailbox has nine output bins. The value of "optionaloutbin2"corresponds to the up-
permost output bin. Selecting the bigger value, you can select the upper output bin.
The following sample shows how to print using standard tray (host name:
nphost, file name: file1).
• rsh
% rsh nphost print outbin=upper < file1
• rcp
% rcp file1 nphost:outbin=upper
• ftp
ftp> put file1 outbin=upper
22
*1
*2
*2
Value
upper
finishershift
finisherproof
*3
optionaloutbin1∼10