Advertisement
надежно, но не прилагая черезмерных усилий, чтобы не повредить
крепления.
4. Подключите питание вентилятора 4 pin к соответствующему разъему
(CPU FAN) на материнской плате. Для активации подсветки вентилятора
и верхнего сегмента, обратитесь в раздел «Установка и работа вентилято-
ра. Подсветка.» и Схеме (D).
5. Система процессорного охлаждения готова для использования.
Installation of CPU cooling system:
Socket INTEL: LGA 1156 /1155 /1151 /1150/ 1200/ 1366/ 1700 Schema (В)
1. Preparing the universal plate (G): identify the Socket and place the plastic
retainers at each end of the plate in the position that matches it.
2. Remove the protective film from the surface of CPU cooling system that is
in direct contact with CPU. Place the mount with screws (D) in the position
indicated in the schema and fix with screws (H).
3. Open the package of thermal paste (J) carefully. Apply thermal grease to
CPU, squeeze a small drop (4-5 mm diameter) onto the center of CPU. Place
the universal plate (G) on the motherboard and the mount with screws
(D) directly into the holes that are in the plastic retainers. It is necessary to
tighten the screws securely, but not with excessive force, so as not to damage
the fasteners.
4. Connect the 4 pin fan power to the corresponding connector (CPU FAN) on
the motherboard. To activate the backlight of the fan and the upper segment,
refer to the section «Installation and operation of the fan. Backlight.» and
Scheme (D).
5. CPU cooling system is ready for using.
8
Advertisement
