Advertisement
3. Подключите питание вентилятора 4 pin к соответствующему разъему
(CPU FAN) на материнской плате. Для активации подсветки вентилятора
и верхнего сегмента, обратитесь в раздел «Установка и работа вентиля-
тора. Подсветка.» и Схеме (D).
4. Система процессорного охлаждения готова для использования.
Installation of CPU cooling system:
Socket AMD: FM1/FM2/AM2/AM2+/AM3/AM3+/AM4/AM5 Schema (С)
Attention! To install on an АМ3/AM4/АМ5 socket, you need to unscrew the
original motherboard mount.
1. Place the mount with screws (F) in the position indicated in the schema
and fix with screws (H). Please, remove the transparent protective film from
the surface of CPU cooling system that is in direct contact with CPU.
2. Open the package of thermal paste (J) carefully. Apply thermal grease to
CPU, squeeze a small drop (4-5 mm diameter) onto the center of CPU. Place
the CPU cooler with the screwed fasteners (F) on the CPU. It is necessary
to tighten the screws into the corresponding holes on the motherboard
securely, but not with excessive force, so as not to damage the fasteners.
3. Connect the 4 pin fan power to the corresponding connector (CPU FAN)
on the motherboard. To activate the backlight of the fan and the upper
segment, refer to the section «Installation and operation of the fan.
Backlight.» and Scheme (D).
4. CPU cooling system is ready for using.
AM3/AM4
AM5
11
Advertisement
