Windows Xp/Server 2003 Configuration; Configuring Windows Xp/Server 2003; Printing Without A Print Server; Printing With A Standard Tcp/Ip Port - Ricoh AP400 Network Manual

3. Windows XP/Server 2003

Configuring Windows XP/Server 2003

Printing without a Print Server

The following procedure describes how to configure Windows XP/Server 2003
to use the machine on a network without a Windows 2000 Server, Windows 2000
Professional, Windows XP/Server 2003, Windows NT Server, Windows NT
Workstation or NetWare based print server.
A A A A
Specify the protocol to use
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
B B B B
Configure the protocol.
• See p.39 "Configuring TCP/IP and IPP for Printing".
C C C C
Install the software and set the printer driver port
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.

Printing with a Standard TCP/IP Port

Standard TCP/IP port is a standard port of Windows XP/Server 2003 to enable
Peer-to-Peer printing in a network environment.
For more information about Standard TCP/IP port settings, see Windows
XP/Server 2003 Help.
Note
❒ If a device model selection dialog box appears during the procedure to add
the standard TCP/IP port, select "RICOH Network Printer C Model".
Configuration
37