Ricoh Ri 1000 Manual page 8

After passing through the guide rod, move the head protection cover to the bottom of
the carriage, keeping it parallel to the guide rod and carriage so that the cap is
horizontal. At this time, please keep the cap surface of the head protection cover
facing toward the upper carriage.
3. Align the left and right corners of the head protection cover with the
carriage corners.
The places to align are the right and left sides of the carriage, respectively, as shown
below.
In doing so, be careful of the orientation of the head protection cover.
[Right side]
Procedure for long-term storage
8 / 22
RICOH Ri 1000