Ricoh Ri 1000 Manual page 12

RICOH Ri 1000
Procedure for long-term storage
3.Remove the head protection covers from the carriage by pushing it
downwards.
The claw on the left side of the head protection cover can be removed at the same
time when the head protection cover is pushed down.
4.Remove the head protection covers from between the guide rods.
When removing the head protection cover from between the guide rods, it is
recommended to hold the flat cable with the hand opposite to the hand holding the
head protection cover while removing the head protection cover, since the head
protection cover tends to get caught on the flat cable.
12 / 22