Ricoh Ri 1000 Manual page 14

RICOH Ri 1000
Procedure for long-term storage
2.Fill all caps of the head protection cover with cleaning solution using a
dropper.
Secure approximately 2 ml of cleaning solution from the bottle of cleaning solution.
Place approximately 1 ml of cleaning solution, secured with a dropper, inside the cap.
After adding approximately 1 ml, pour the remaining cleaning solution in the dropper
one drop at a time into the cap until the liquid level is raised slightly above the rim of
the cap, as shown in the illustration below, when viewed from the side.
This should be done for all caps.
If bubbles are generated, please use a dropper to suck out the bubbles, as they may
not protect the head properly.
3.Move the cleaning solution in the head protection cover under the
14 / 22