Ricoh Ri 1000 Manual page 7

RICOH Ri 1000
Procedure for long-term storage
machine.
2. Move the head protection cover under the carriage.
We recommend that the head protection cover be moved under the carriage by
standing on the right side of the printer, in front of the maintenance unit, and passing
it through the guide rods from above.
To do so, hold the right side of the head protection cover (the side with the two claws
at the top) as shown below to make it easier to attach the cover to the carriage. Note
the orientation of the head protection cover.
If the carriage is in a position where it is difficult to pass through the head protection
cover when working, move the carriage slowly by hand to ensure a gap for the head
protection cover to pass through.
7 / 22