Hoshizaki Steelheart Series Service Manual page 7

NOTICE
• Protect the floor when moving the
appliance to prevent damage to the floor.
• Keep ventilation openings clear of
obstruction. The factory-installed rear
bumpers must be in place to ensure
proper rear clearance. Blockage of airflow
could negatively affect performance and
damage the appliance.
• Do not allow the appliance to bear any
outside weight.
• To prevent deformation or cracks, do not
spray insecticide onto the plastic parts or
let them come into contact with oil.
• To avoid damage to the gasket, use only
the door/drawer handle when opening
and closing.
• Do not leave the doors/drawers open.
• To avoid damage to the top seal, do not lift
the appliance by the top panel or remove
the top panel.
• Do not place anything on top of the rail
hood or rail cover and do not lift the
appliance by the rail hood or rail cover.
The rail hood and rail cover are not
designed to bear any outside weight.
• Do not place anything on the air duct
panel beneath the pans in the rail.
The air duct panel is not load-bearing.
7