Hoshizaki Steelheart Series Service Manual page 30

c) Cabinet Temperature Display Scale Value (35
To change the temperature display scale value from a whole number to one decimal
point, follow the steps below.
1) Press and hold both the up and down buttons for 5 seconds,"EHE" is displayed.
2) Press the up or down arrow button until "diS" is displayed.
3) Press the up or down arrow button until "rES" is displayed. Press the power button,
current setting is displayed.
4) Select between 3 settings -
a) 1.0 - Setting will show temperature rounded to the nearest whole number degree.
b) 0.5 - Setting will show temperature rounded to the nearest half number degree.
c) 0.1 - Setting will show temperature as decimal degree, no rounding occurs.
5) Press the power button to save desired selection, "rES" is displayed. To return to normal
display mode, wait 1 min. or press the back button twice to return to temperature
display.
Note: If no selection is saved within 30 seconds, the display returns to normal mode
and display remains unchanged.
Back
Button
Power
Button
F/C or 35.0°F/C):
°
V
Up Button
°F
V
Down Button
Fig. 10
30
Front Panel