True Induction TI-1G Manual page 19

V. Trouble Shooting
Correct Replacement of the Gas Burners
It may occur that the cooktop does not function or does not function properly. Before calling
customer service for assistance, lets see what can be done.
First, check to see that there are no interruptions in the gas and electrical supplies, and, in par-
ticular, that the gas valves for the mains are open.
The burner does not light or the flame is not
uniform around the burner.
The flame does not stay lighted on the model
with the safety device.
The burner does not remain on when set to
"Low".
The cookware is not stable.
TI-1G & TI-2G GAS COMBO COOKTOP MANUAL
Error Cause and Potential Solution
The gas holes on the burner are not

clogged.
All of the movable parts that make up the

burner are mounted correctly.
There are no draughts around the cooking

surface.
You press the knob all the way in.

You keep the knob pressed in long

enough to activate the safety device.
The gas holes are not clogged in the area

corresponding to the safety device.
The gas holes are not clogged.

There are no draughts near tire cooking

surface.
Tile minimum has been adjusted correctly

(see the section entitled, "Minimum Regu-
lation").
The bottom of the cookware is perfectly

flat.
The cookware is centered correctly on the

burner or electric hot plate.
The support grids have not been inverted.

P. 19