Advertisement
IIII. How To Use The Cooktop Continued...
Gas Burners
Any film or stickers on the cooktop surface should be removed before use.
All operations are performed by means of all control knobs. Knob controls electric ignition,
safety device & flame level.
TO IGNITE- push and turn the knob for 1~2 seconds in a counterclockwise direction up to
the HI position (Maximum rate), push in and hold the knob until the flame has been lit. The
sparks produced by internal igniter will light the designated burner.
In the event that the local gas supply conditions mark it difficult to light the burner in the HI
position, try again with the knob in LOW position.
To re-light the burner, return the knob to the OFF position and repeat the operation for light.
To shut off burner, turn the knob in clockwise direction, to OFF position.
For greater efficiency and lesser gas consumption, use the pots and pans with the right diame-
ters of the burners. Avoid having flames extending out from underneath the pans (refer to the
table). A smaller diameter pot or pan placed on a larger burner does not necessarily mean an
increased rate in boiling conditions.
TI-1G & TI-2G GAS COMBO COOKTOP MANUAL
LIGHTING GAS BURNERS
COMPATIBLE COOKWARE FOR GAS BURNERS
Burner
Auxiliary
Semi-Rapid
Rapid
Triple Ring
Pan Diameter
3.2'' to 5.5''
5.5'' to 7.8''
7.8'' to 11''
Above 10.2''
P.
15
Advertisement
