Advertisement
IV. Cleaning & Maintenance
IMPORTANT: Before any operation of cleaning and maintenance, disconnect the appliance
from the electrical supply. It's advisable to clean when the appliance has cooled, especially for
cleaning the enameled parts.
Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.
Avoid using cleaning products with a chlorine or acidic base.
Burner & grids can be removed and cleaned with appropriate detergent.
After cleaning it is very important to check that the burner flame distributor F and the cap C
are correctly repositioned. Also check the electrode S & Thermocouple are clean to ensure
trouble-free sparking.
Stainless steel can be stained if it's in contact with highly calcareous water or aggressive de-
tergents (containing phosphorus). It is recommended these parts be cleaned with water and
then dried well.
All burner caps and burner bases should be properly installed BEFORE operating the cook-
top, Check that each burner has the right size head and cap.
Burner caps and heads are included with your cooktop,
Always match the burner head size to the cap size.
Always line up the hole in the burner head to the electrode.
It's very important to check that the burner flame distributor F and the cap C are correctly repo-
sitioned. Failure to do so can cause serious problems. Also check the electrode S & Thermocou-
ple are clean to ensure trouble-free sparking.
TI-1G & TI-2G GAS COMBO COOKTOP MANUAL
CORRECT REPLACEMENT OF THE BURNERS
P.
17
Advertisement
