True Induction TI-1G Manual page 10

III. Cooktop Installation Continued...
Discharging Product of Combustion
Extractor hoods connected directly to the outside should be used, to allow the products of

combustion of the cooktop to be discharged (fig.16), (fig.17).
Every cook top is provided with a set of tabs for fitting to the unit with thickness from 1/16'' to 1
4/7'' and a seal with adhesive on one side.
Remove burners and grids.

Turn the cooktop over and rest the top side on a cloth.

Apply the self-adhesive seal "G" as illustrated in fig.14.

Slot the cooktop into the unit and position.

Position the cooktop in the recess and secure by means of the brackets as shown in fig.15

(for 1 3/16'' or 1 37/64'' thick work top).
TI-1G & TI-2G GAS COMBO COOKTOP MANUAL
SETTLING THE HOB FOR INSTALLATION
See next page for illustrations.
P. 10