Installing Options - Ricoh AP2610 Setup Manual

R CAUTION:
• Be sure to turn off the printer and wait for about an hour before installing
options. Not waiting for the printer to cool down can result in a burn.
• When lifting the printer, use the inset grips on both sides of the printer, oth-
erwise the printer might fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
Important
❒ The voltage rating of the connector for options is 24V DC or less.
❒ Turn the power off before removing the Paper Feed Unit Type 2600, 1-bin
Shift Sort Tray Type 2600, or Mailbox CS380. Removing any of these units
with the power on may cause the printer to fail.
❖ ❖ ❖ ❖ Option List
Note
❒ See the inside front cover of this manual to confirm which printer (Basic
model or Network standard model) you have.
Paper Feed Unit Type 2600
Envelope Feeder Type 2600
1-bin Shift Sort Tray Type 2600
CS380 (Mailbox)
AD410 (Duplex Unit)
Memory Unit TypeB 64MB
Hard Disk Drive Type 2600
Network Interface Board Type 2610
1394 Interface Unit Type 4510
802.11b Interface Unit Type A
❍ : Available option
*1
With Basic model, these cannot be installed at the same time.
*2
With Network standard model, these cannot be attached at the same time.
Note
❒ Up to two Paper Feed Units can be attached to the printer at the same time.
❒ The installation of the Paper Feed Unit is necessary to attach the Envelope
Feeder Unit.

2. Installing Options

Basic model Printer
*1
*1 *2
*1 *2
Network standard
model Printer
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍
❍ ❍
❍ ❍
11