Ricoh AP2610 Setup Manual page 32

Installing Options
N N N N
Plug the printer's power cord
back into the wall outlet, and then
turn on the power switch.
Important
❒ If you use a Windows operating
system, you should set up the
Memory Unit with the printer
2
driver to make the printer recog-
nize the installation. See the de-
scription of Windows 95/98/Me,
Windows 2000 and Windows NT
4.0 on p.51 "Installing the Printer
Driver and Software".
Note
❒ After installing the last option that
you want, print the configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing
the configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
❒ To remove the Memory Unit, press
the button on the end of the slot.
20