Table of Contents
Advertisement
R CAUTION:
• Be sure to turn off the printer and wait for about 30 minutes before installing
options. Not waiting for the printer to cool down can result in a burn.
• When lifting the printer, use the inset grips on both sides of the printer, oth-
erwise the printer might fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
Option List
Note
See the inside front cover of this manual to confirm which printer (Type 1
Printer or Type 2 Printer) you have.
Paper Feed Unit (A3) Type 2000
Paper Feed Unit (A4) Type 2000
Paper Feed Unit Type 1400
Envelope Feeder Type 2000
Envelope Feeder Type 1400
Network Interface Board Type 2000
Hard Disk Drive Type 2000
RS232C Board Type 2000
Printer Feature Expander Type 185
(32MB)
Printer Feature Expander Type 185
(64MB)
: This option can be installed.
*1
Type 1 Printer: You can install any combination of these units. Up to two paper
feed units can be installed to the printer at a time.
*2
Type 2 Printer: Only one paper feed unit can be installed at a time.
*3
This requires the installation of Paper Feed Unit Type 2000.
*4
This requires the installation of Paper Feed Unit Type 1400.
*5
Only two of them can be installed at a time.
*6
Only one of them can be installed at a time.
*7
Only one of them can be installed at a time.
2. Installing Options
Type 1 Printer
*1
*1
*2
*3
*4
Type 2 Printer
*5
*5
*5
*7
*7
*6
*6
*6
*7
*7
13
Advertisement
Table of Contents
