HP EliteBook x360 1040 Maintenance And Service Manual page 56

2. Remove the cable retainer (2) and the I/O bracket (3) from the computer.
The cable retainer and the I/O bracket are included in the Bracket Kit, spare part number
N49522-001.
3. Remove the microSD card blank insert (1) from the microSD card slot.
4. Remove the connector board (2) from the computer.
To install the connector board, reverse this procedure.
Fan
To remove the fan, use this procedure and illustration.
Table 5-9 Fan description and part number
Description
Fan (includes cable and captive screws)
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 39).
Spare part number
N02330-001
Battery on page 41).
39).