Advertisement
FlexiBridge Big Bridge mode
To activate the mode press
see the correct mode indicator
mode connects the three rear sections
into one cooking area. The front section
is not connected and operates as a
separate cooking zone. You can set the
heat setting for each area separately.
Use the two control bars on the left side.
Correct cookware position:
Make sure to place the cookware on the
three connected sections. If you use
cookware smaller than two sections the
control bar blinks and after 2 minutes the
zone deactivates.
Incorrect cookware position:
FlexiBridge Max Bridge mode
To activate the mode press
see the correct mode indicator
mode connects all sections into one
cooking area. To set the heat setting use
until you
any of the two control bars on the left
. This
side.
Correct cookware position:
Make sure to place the cookware on the
four connected sections. If you use
cookware smaller than three sections the
control bar blinks and after 2 minutes the
zone switches off.
Incorrect cookware position:
ENGLISH
15
until you
. This
Advertisement
