Advertisement
14
www.aeg.com
cooking area. You choose the
combination of the sections by choosing
the mode applicable to the size of the
cookware you want to use. There are
three modes: Standard, Big Bridge, and
Max Bridge.
To set the heat setting use
the two control bars on the
left side.
Switching between the modes
To switch between the modes press
The heat setting levels will be kept.
Diameter and position of the
cookware
Choose the mode applicable to the size
and the shape of the cookware. The
cookware should cover the selected area
as much as possible.
Place the cookware with the bottom
diameter smaller than 160 mm centrally
on a single section. You can use a
roaster pan for the Big Bridge and the
Max Bridge modes.
Place the cookware with the bottom
diameter larger than 160 mm centrally
between two sections.
.
100-160mm
FlexiBridge Standard mode
This mode is activated by default when
you activate the function. It connects the
sections into two separate cooking
areas. You can set the heat setting for
each area separately. Use the two
control bars on the left side.
Correct cookware position:
Incorrect cookware position:
> 160 mm
Advertisement
