Download Print this page

AEG IKE95771FB User Manual page 12

Hide thumbs Also See for IKE95771FB:

Advertisement

12
www.aeg.com
• If the hob reaches the limit of
maximum available power (refer to
the rating plate), the power of the
cooking zones will be automatically
reduced.
• The heat setting of the cooking zone
selected first is always prioritised. The
remaining power will be divided
between the previously activated
cooking zones according to the order
of selection.
• For cooking zones that have a
reduced power, the control bar blinks
and shows the maximum possible
heat settings.
• Wait until the display stops flashing or
reduce the heat setting of the cooking
zone selected last. The cooking zones
will continue operating with the
reduced heat setting. Change the
heat settings of the cooking zones
manually, if necessary.
5.9 Menu structure
The table shows the basic menu
structure.
User settings
Sym‐
Setting
bol
b
Sound
H
Hood mode
6. ADDITIONAL FUNCTIONS
6.1 Automatic Switch Off
The function deactivates the hob
automatically if:
• all of the cooking zones are
deactivated,
• you do not set any heat setting or fan
speed setting after the activation of
the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). A signal
sounds and the hob deactivates.
Remove the object or clean the
control panel.
Possible op‐
tions
On / Off (--)
0 - 6
Sym‐
Setting
bol
E
Alarm / error
history
To enter user settings: press and hold
for 3 seconds. Then, press and hold
. The settings appear on the timer of
the left cooking zones.
Navigating the menu: the menu
consists of the setting symbol and a
value. The symbol appears on the rear
timer and the value appears on the front
timer. To navigate between the settings
press
on the front timer. To change
the setting value press
front timer.
To exit the menu: press
OffSound Control
You can activate / deactivate the sounds
in the Menu > User settings.
Refer to "Menu structure".
When the sounds are off you can still
hear the sound when:
• you touch
,
• the timer comes down,
• you press an inactive symbol.
• the appliance gets too hot (e.g. when
a saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the appliance
deactivates:
Heat setting
1 - 2
Possible op‐
tions
The list of recent
alarms / errors.
or
on the
.
The hob deacti‐
vates after
6 hours

Advertisement

loading