Mixing Scan Settings For A Multiple; When Placing Originals On The Exposure Glass - Ricoh Aficio 3224C Operating Instructions Manual

Faxing
Manual Image Density
A Make sure that [Auto Image Den-
sity] is not selected. If it has
been selected, press [Auto Image
Density] to turn it off.
B Press [i
2
adjust the density.
The square moves.
Combined Auto and Manual
Image Density
A Select the [Auto Image Density].
B Press [i
adjust the density.
The square moves.
32
i Lighter] or [Darkerj
i i
i Lighter] or [Darkerj i i
Mixing Scan Settings for a
Multiple Page Original
When sending an original of several
pages, you can select a different im-
age density, resolution, and original
j ] to
j j
type setting for each page.
Place the original, select the scan set-
tings for the first page, dial, and then
press the { { { { Start} } } } key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
be placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
Note
j j j ] to
❒ While the machine is beeping, you
have about 60 seconds (10 seconds
for Immediate Transmission) to se-
lect density, resolution, and origi-
nal type. The remaining time is
shown on the display.
A A A A
Check which pages you want to
scan with different settings.
B B B B
Remove the previous page and
place the next page.
C C C C
Select the image density, resolu-
tion, and original type.