Advertisement
Available languages
Available languages
Press
to select
-
Press
to display the Measurement Type Menu
-
(Figure E 3).
Press the arrow buttons to select .
-
Press
.
-
5. Position the tool opposite the bottom of the vertical height
to be measured (Figure P 1).
6. Point the laser toward the highest point of the building or
object whose height you need to measure (Figure P 1).
7. Press
to measure the distance.
8. View the height measurement at the bottom of the screen
(Figure P 2).
Distances to 2 Points
You can use the distance to two points on a wall or object
(Double Indirect Height) to determine its height (Figure Q).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press
(Figure A 3) to turn the tool on and display the
red laser dot.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select
as the measurement type.
Press
to display the Main Menu (Figure E 2).
-
Press
to select
-
Press
to display the Measurement Type Menu
-
(Figure E 3).
Press the arrow buttons to select .
-
Press
.
-
5. Position the tool opposite the approximate center of the
vertical height to be measured (Figure Q 1).
6. Point the laser toward the lowest point of the building or
object whose height you need to measure (Figure Q 2).
7. Press
to measure the distance.
8. From the same point, aim the laser at the highest point of
the building or object (Figure Q 3).
9. Press
to measure the distance.
10. On the bottom line of the screen, view the height of the
building or object (Figure Q 4).
Measuring Partial Height
If you need to determine the height of a section of a wall or
object (e.g., the distance from the ceiling to the top of TV or
window on the wall) (Figure R).
1. Point the tool's laser (Figure A 1 toward a wall or object, and
not toward anyone's eyes.
2. Press
(Figure A 3) to turn the tool on and display the
red laser dot.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select
as the measurement type.
Press
to display the Main Menu (Figure E 2).
-
Press
to select
-
.
.
.
Press
to display the Measurement Type Menu
-
(Figure E 3).
Press the arrow buttons to select
-
Press
.
-
5. Point the laser at the highest point of the wall or object
(Figure R 1).
6. Press
to measure the distance to the top of the tall
object.
7. From the same point, aim the laser at the top of the
obstruction on the wall or object (Figure R 2).
8. Press
to measure the distance from the top of the wall
to the obstruction (TV, window, etc.).
9. From the same point, aim the laser on a horizontal line
straight ahead toward the bottom of the wall (Figure R 3).
10. Press
to measure the distance.
11. On the bottom line of the screen, view the distance
between the top of the wall and the top of the obstruction
on the wall (Figure R 4).
Measuring Height of Obstructed Object
Follow these steps to determine the height of a tall building or
object that is blocked by other buildings or objects (Figure S).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press
(Figure A 3) to turn the tool on and display the
red laser dot.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select
as the measurement type.
Press
to display the Main Menu (Figure E 2).
-
Press
to select
-
Press
to display the Measurement Type Menu
-
(Figure E 3).
Press the arrow buttons to select
-
Press
.
-
5. Point the laser at the highest point of the building, wall, or
object (Figure S 1).
6. Press
to take the measurement.
7. On the bottom line of the screen, view the height of the
building or object (Figure S 2).
Measuring from a Tripod
If you are placing the tool on a tripod to measure the height of a
tall building, follow these steps (Figure T).
1. Screw the 1/4-20" hole on the back of the tool onto the 1/4-
20" connection on the top of your tripod (Figure T 1).
2. Point the tool's laser (Figure A 1 toward a wall or object, and
not toward anyone's eyes.
3. Press
(Figure A 3) to turn the tool on and display the
red laser dot.
4. Make sure the tool position setting (Figure C 4) is
measure from the tripod connection.
5. Select as the measurement type.
Press
to display the Main Menu (Figure E 2).
-
English
.
.
.
to
13
Advertisement
