Advertisement
Movement Cover
OPEN: Turn the cover counterclockwise until the head is aligned
with the arrow. Then lift the cover off the clock.
CLOSE: Place the rubber weather seal and cover in the open
position and turn the cover clockwise until the head is back on top
and these lock into place.
OPEN
CLOSE
Power Up
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Time Set
Wheel
Battery
AA
Compartment
Learn more from our video:
CLOSE
Note: The quartz movement
will keep the clock running
accurately. If the clock does not
operate, or steadily loses time,
replace the battery.
bit.ly/wallclock_setup
Thermometer/Hygrometer
The Clock has analog gauges that measures surrounding
•
temperature and humidity.
The temperature information is displayed in degrees Fahrenheit
•
The thermometer and hydrometer are precalibrated and self
•
adjusting and do not require a battery to operate.
CLOSE
Mounting
Indoor: Mount the clock on a wall using the hanging hole on the
back.
Outdoor: Choose a shaded location with an overhang to help
protect the clock from direct sunlight, rainfall, and other weather
elements. A fully shaded location will help prevent inaccurate
temperature readings. Use the hanging hole on the back to mount
the clock on a wall.
Care and Maintenance
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.
Advertisement
