4. Once the sensor is reading to your clock, place the senor outside in a shaded location. View our sensor mounting video here: bit.ly/th_sensor_mounting Atomic Clock S74870 Outdoor Sensor TX141-Bv4 ATOMIC TIME • The clock will search for the Atomic Time Signal at power up and at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
SETTINGS MENU 1. Hold the button to enter the Settings Menu. 2. Use the buttons to adjust values. 3. Press to confirm values. 4. Press the SNOOZE button at any time to save and exit. Settings Menu Order: • Beep ON/OFF •...
CUSTOM DISPLAY Press the MOON button to switch between Calendar or Moon Phase. Your clock will stay on the selection. MOON PHASE Phase / Clock Reads Phase / Clock Reads Phase / Clock Reads • The moon phase is based on WANING GIBB NEW MOON WAXING GIBB...
TIME ALARM Set Alarm: 1. Hold the ALARM button to enter Alarm Settings. 2. Use the buttons to adjust values. 3. Press the ALARM button to confirm and move to next item. Silence a sounding alarm: Press any button except SNOOZE to silence the alarm for 24 hours.
HI/LO TEMPERATURE RECORDS View: Press the + button to view Outdoor, then Indoor Temperature HI and LO Records with time and date stamps. Reset: While viewing individual records, hold the button to reset to current temperatures. TEMPERATURE TREND ARROWS Both the Indoor and Outdoor temperature have Trend Arrows to indicate temperature changes (2°F / 1°C) over the past one hour period.
SEARCH FOR OUTDOOR SENSOR If you are seeing NO or dashes for your outdoor readings, please try the following steps: 1. Hold the SEARCH button to search for your outdoor sensor. The Reception Indicator will begin to animate. 2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and clock.
Transmission Range: WARRANTY Over 330 ft. open air (100 meters) RF 433MHz La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) Update Interval: on this product relating to manufacturing About every 51 seconds defects in materials &...
CARE AND MAINTENANCE FCC STATEMENT Battery Replacement Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 When batteries of different brand or type are used of the FCC Rules. These limits are designed to provide together, or new and old batteries are used together, reasonable protection against harmful interference in a some batteries may be over-discharged due to a...