Table of Contents
Advertisement
Dynamic IP Setting
User should firstly ensure that the switch has access
to the network. Then connect TAO 1mini and the
computer to the same switch and in the same LAN.
Finally, turn on DHCP of TAO 1mini, no configuration
is needed for your computer.
www.rgblink.com
Connect Network
Connect Network
Connect one end of the network cable to LAN port of
TAO 1mini. The other end of the network cable is
connected to the switch. You can also connect
directly to the network port of your computer.
Network Configuration
TAO 1mini and your computer configuration must be
in the same LAN. There are two ways to configure a
network.
Static IP Setting
Step 1: Click Network icon in Settings for TAO 1mini
network configuration. Turn off DHCP and manually
configure IP address, net mask and gateway. The
default IP address is 192.168.5.100.
Step 2: Turn off the computer's network an then
configure TAO 1mini and computer to the same LAN.
Please set the IP address of the computer network
port to 192.168.5.*.
Step 3: Please click the buttons on the computer as
follows: "Network and Internet Settings" >
"Network and Sharing Center" > "Ethernet" >
"Internet Protocol Version 4" > "Use the IP address
below", then manually enter the IP address with
192.168.5.*.
4
Advertisement
Table of Contents
