NDI Decoding ......................... 6 RTMP Push ............................8 YouTube Stream ..........................9 Operate RTMP Push via USB disk ..................9 Operate RTMP Push via TAO APP ..................9 On Air ............................12 RTMP Pull ............................14 Recording ............................15 Contact us ............................16 www.rgblink.com...
HX2/ NDI | HX ● Stream to at least 4 platforms at the same time ● Low latency of end-to-end transmission ● Intuitive touch control, higher color and image quality ● Power from USB-C or PoE network ● Dual ¼in mounts www.rgblink.com...
Front Panel ❶ ❸ ❷ 2.1-inch touch screen for real-time monitoring of signals and menu ❶ Touch Screen operations. Tally Lamp Work indicators show device status. ❷ ❸ ¼in Mounts For mounting. www.rgblink.com...
USB camera for UVC capture. Support 5V/1A reverse power supply. ❹ HDMI For receiving video signal. ❺ 3.5mm Audio Socket For analog audio input and audio output monitoring. ❻ USB3.0 Connect to hard disk for recording, and storage up to 2T. ❼ Gigabit network port with PoE. www.rgblink.com...
Dimension Following is the dimension of TAO 1mini-HN for your reference: 91mm(diameter)x40.8mm(height). Bottom View Right View Front View Rear View www.rgblink.com...
● Five functions:HDMI & UVC input Signal Selection、USB Player、RTMP ❸ Input Area Pull and NDI Decoding. ● Tap yellow arrows to choose function;Tap icon to trigger function. ON AIR Tap icon to start streaming; long-press to enter configuration interface. ❹ www.rgblink.com...
Getting Started Connect Input Signal Connecting Signal Source Connect the HDMI/UVC signal source to the HDMI/UVC input port of TAO 1mini-HN through a cable. And connect the HDMI output port to the display via an HDMI cable. Plug in Power...
Dynamic IP Setting Step 1: Ensure the switch has access to the network. Step 2: Connect TAO 1mini-HN and the computer to the same switch and in the same LAN. Step 3: Turn on DHCP of TAO 1mini-HN, no configuration is needed for your computer.
Tap yellow arrows to select HDMI or UVC as input signal according to actual input, and make sure the input image can be displayed successfully on the screen of TAO 1mini-HN. Configuring Parameters Tap NDI Encoding icon in Output Area to turn on...
Refer to the following diagram for application of NDI decoding. Selecting NDI Sources Configure network of other device (Support NDI decoding) and TAO 1mini-HN to the same LAN. Tap yellow arrows to select NDI Decoding icon. Long press the icon to enter the NDI decoding interface.
Page 12
Click Search to find the NDI sources in the same LAN. Find the NDI source to be decoded by swiping the screen and then click to decode and output. Warning: NDI encoding mode and decoding mode cannot work simultaneously. www.rgblink.com...
The interface will display the RTSP/RTMP/SRT stream address of TAO 1mini-HN. Check RTSP/RTMP/SRT stream address by clicking Users can modify IP address of TAO 1mini-HN in Network Settings and then the RTMP/RTSP/SRT stream address will be modified synchronously. Configuring Parameters Click Edit Icon at the bottom to set the Resolution, Bitrate and Display Mode.
STREAM URL/YOUR STREAM KEY), and save the TXT file to USB as rtmp.ini.( Newline is required to add multiple streaming addresses ) and connect the USB disk to TAO 1mini-HN’s USB port. Operate RTMP Push via TAO APP Copying Stream Address & Key Create QR code: https://live.tao1.info/stream_code/index.html...
Page 15
Click TAO APP Icon to enter the homepage. Click Scan Icon in the homepage and then click Send RTMP to Device. Turning on Bluetooth Click Bluetooth icon in Settings. Choose to turn on or off Bluetooth by swiping the screen left and right. www.rgblink.com...
Page 16
After successful paring, click Device Name > Scan Icon > Scan QR code. Sending RTMP Stream Address The RTMP address will be shown in the box, then click Send RTMP. Receiving RTMP Stream Address TAO 1mini-HN will pop up a message, click YES to receive. www.rgblink.com...
The green circle indicates the platform been chosen. Long press the icon to check stream address and click Edit in the middle for deletion of platform. Configuring Parameters Users can also set Resolution, Bitrate and Display Mode by clicking shown as below. www.rgblink.com...
Page 18
Click the blank area of the home page. The left area No network input No U disk Bluetooth not connected is the Status Display Area, which displays the status of the TAO 1mini-HN. With network input U disk inserted Bluetooth connected Warning: --Streaming, --Available but Failed in Streaming.
Downloading TAO APP Click the icon for TAO APP installation. Turn on Bluetooth in Settings to pair TAO 1mini-HN with your mobile phone so as to import RTMP stream address via TAO APP.
Recording Inserting a U Disk Insert a U disk to TAO 1mini-HN USB port and TAO 1mini-HN can work as a recorder. The storage of U disk is up to 2T. Configuring Parameters Press and hold USB Recording icon to enter parameter configuration interface.
All products are designed and tested to the highest quality standard and backed by 1 year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include...
Need help?
Do you have a question about the TAO 1mini-HN and is the answer not in the manual?
Questions and answers