Ndi Encoding - RGBlink TAO 1mini Quick Start Manual

NDI Encoding Application Diagram
Users can refer to the following diagram for
application of NDI encoding.
Configure NDI Encoding Parameters
Tap NDI Encoding icon in Output Area to turn on
NDI Encoding and long press the icon to choose
encoding format (NDI|HX
resolution, bitrate and check channel name.
www.rgblink.com

NDI Encoding

by default), set
Input Signal Selection
Tap yellow arrows to select/switch HDMI/UVC as input
signal according to actual input signal source, and
make sure the input image can be displayed
successfully on the screen of TAO 1mini.
Download NDI Tools
Download: https://www.newtek.com/ndi/tools/#
Open NewTek Studio Monitor software and then click
the icon in the upper left corner to display the list of
device names discovered. Select device to connect,
and pull the current video stream of TAO 1mini.
After successful pull of video stream, you can click
blank area of device interface to check NDI
resolutions.
5