ABB TMAX XT XT2 THERMOMAGNETIC Disassembly Instructions Manual page 9

Hide thumbs Also See for TMAX XT XT2 THERMOMAGNETIC:

Disassembly instruction tmaX Xt Xt2 tHermomaGnetic

6.5 PHASE 5 – PLASTIC PARTS MOUNTED ON THE BREAKING PART

Actions to be performed

Tools

Flat screwdriver

Manually slightly push the 2 flaps present on

each case for microswitch located in the right

hole of the breaking part as indicated by the

arrows and after manually lift each case for

microswitch to complete the removal.

Manually lift cable crossing cover located in the

upper part of the breaking part.

Disassembled parts

By means of the flat screwdriver lift the plug

located in the left hole of the breaking part and

after manually complete the removal of the

plug.

By means of the flat screwdriver lift the white

plastic lever located in the upper part of the

breaking part and after manually complete the

removal of the white plastic lever.

• 5 cases for microswitches (Plastic) SEPARATE

TREATMENT (Thermoplastics containing

brominated flame retardants)

• 1 plug (Plastic) SEPARATE TREATMENT

(Thermoplastics containing brominated flame

retardants)

• 1 cable crossing cover (Plastic)

• 1 lever (Plastic)