ABB TMAX XT XT2 THERMOMAGNETIC Disassembly Instructions Manual page 13

Disassembly instruction tmaX Xt Xt2 tHermomaGnetic
6.8 PHASE 8 – BREAKING PART COVER AND CONNECTED PARTS
Actions to be performed
Tools
Flat screwdriver
26
Manually lift the breaking part cover.
Pliers
Cross screwdriver
28
Manually lift the motor operator lever located
between the hole previously hosting the
operating mechanism and the left hole and
after manually remove the motor operator
lever.
27
By means of the flat screwdriver push down
the block lever located between the hole
previously hosting the operating mechanism
and the right hole and after manually remove
the block lever.
29
By means of the pliers remove the hood
mounted on the motor operator lever removed
at previous step.
13