ABB TMAX XT XT2 THERMOMAGNETIC Disassembly Instructions Manual page 12

Hide thumbs Also See for TMAX XT XT2 THERMOMAGNETIC:

INSTRUCTION HANDBOOK

By means of the pliers remove the spring

mounted in the middle of the operating

mechanism.

By means of the flat screwdriver remove the

metal plate mounted on the tripping shaft.

Disassembled parts

Manually remove the tripping shaft from the

operating mechanism pulling it as indicated by

the arrow.

By means of the flat screwdriver and by means

of the pliers dismount the pin and remove

the pin and the 2 springs mounted on the pin

itself.

• 4 + 4 screws (Metal)

• 1 operating mechanism (Plastic and Metal)

• 1 + 2 springs (Metal)

• 1 tripping shaft (Plastic) SEPARATE TREATMENT

(Thermoplastics containing brominated flame

retardants)

• 1 plate (Metal)

• 1 pin (Metal)