Advertisement
Disassembly instruction tmaX Xt Xt2 tHermomaGnetic
6.7 PHASE 7 – OPERATING MECHANISM AND TRIPPING SHAFT
Actions to be performed
Tools
Torx key
18
By means of the torx key (size 20) unscrew
the 4 screws located in the back part of the
No. 8
breaking part.
No. 20
Flat screwdriver
Pliers
20
By means of the flat screwdriver unhook the 2
springs mounted on the operating mechanism.
19
By means of the torx key (size 8) unscrew the 4
screws located at the corners of the breaking
part cover.
21
Manually lift the operating mechanism and
after manually complete removal operation.
11
Advertisement
