R/C Setting
R/C setting method
This section describes how to perform R/C setting.
For details, please refer to "Overview of Screens" in this manual and enter the installer
menu.
Installer menu screen
Sub-menu screen
a
Mode R1
b
Unit – –
Sub-menu screen
Mode R3
Unit – –
Sub-menu screen
Mode R3
Unit – –
Press
or
button, move to "
If Bluetooth is connected, performing field setting from
the remote controller side is impossible.
Disconnect Bluetooth, or perform field setting from the
mobile application.
Press
or
button, to select Mode No. and press
to enter the field setting menu.
a Mode No.
b Unit No.
Press
or
button, to scroll to the desired Mode No.
and press
button.
Press
or
button, to select "
button to set the selection.
".
", and then press
33