Installing The Touchpad - Dell G5 15 5500 Service Manual

Installing the touchpad

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the installation procedure.
Steps
1. Align and place the touchpad into the slot on the palm-rest and keyboard assembly.
2. Replace the four (M2x2) screws and adhere the tapes that secure the touchpad to the palm-rest and keyboard assembly.
3. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.
4. Replace the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the system board.
2. Install the power-adapter
3. Install the display assembly.
4. Install the right fan.
5. Install the left fan.
6. Install the WLAN card.
7. Install the hard drive.
8. Install the solid-state drive/Intel
9. Install the battery.
10. Install the base cover.
11. Follow the procedure in
58 Removing and installing components
port.
Optane.
After working inside your computer.