Table of Contents
Advertisement
7. Install the battery.
8. Install the
base
cover.
9. Follow the procedure in
Fingerprint reader daughter-board
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
solid-state drive/Intel
5. Remove the
WLAN
card.
6. Remove the
right
fan.
7. Remove the
heat
sink.
8. Remove the
power-adapter
9. Remove the
hard
drive.
10. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard
assembly.
2. Lift the power button with fingerprint reader off the palm-rest and keyboard assembly.
After working inside your
Before working inside your
Optane.
port.
computer.
computer.
Removing and installing components
55
Advertisement
Table of Contents
