Display Assembly; Removing The Display Assembly - Dell G5 15 5500 Service Manual

Steps
1. Align and place the I/O board on the palm-rest and keyboard assembly.
2. Install the three screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
3. Connect the I/O-board cable to the I/O board.
Next steps
1. Install the left fan.
2. Install the base cover.
3. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the heat sink.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 47