Table of Contents
Advertisement
ReplayTV5.5 UG.book Page 23 Friday, August 1, 2003 10:58 AM
System Information
View the system information for your ReplayTV. This information includes:
•
the version of software your ReplayTV is using
•
the Serial Number of your ReplayTV
•
video setup, including IR blaster code and channel lineup
•
phone number your ReplayTV uses for dialing the ReplayTV Service
•
IP address
•
MAC address
:: Remote Control Setup
Follow these steps to program the remote control to operate your television, TV/VCR combo or TV/DVD combo. When pro-
grammed, the ReplayTV remote will control your TV's power and volume.
1
Press and hold the Mute and TV (Power) buttons until the LED blinks twice.
2
Enter the 4-digit code for your brand of television (see codes on pages 26-28).
•
For example, for Sony, press Mute and TV (Power) simultaneously, and then press 0-0-0-0.
•
If a valid code has been entered, the LED at the top of the remote will blink twice.
•
If an invalid code has been entered, there will be one long blink and the remote will revert to the previously programmed code.
3
To test the code, press the TV (Power) button on the remote control.
•
If your TV turns on/off, programming is complete.
•
If your TV does not turn on/off, try another code for your brand of television. Not all TVs can be programmed.
• To clear all settings, press Mute + TV(Power), then press 9-8-1.
23
Advertisement
Table of Contents
