Accessory Assembly Instructions - Kärcher Trailer HDS Series Operator's Manual

Operations

Accessory Assembly Instructions

Handle Installation
Washer
Nut
Align the 4 holes in the handle with the holes in the
back plate, install the fasteners and washers supplied.
(See Hose Box and Fuel Tank pages for fastener part
numbers.)
NOTE: Fastener assembly torque to install handle:10
ft-lbs (due to hollow tube handle.)
16
Handle
Bolt
Karcher HDS 3.5/40 GE MT Operator's Manual 9.807-942.0 - C
Safety Rod installation
Rod
Slide the rod through both holes in the tabs. To secure
rod, bend both tabs up slightly, until the rod does not
move freely. (See Hose Box and Fuel Tank pages for
fastener part numbers.)
Tab