Connecting Pods; Identifying Connections - Raymarine ST290 Owner's Handbook Manual

Chapter 2: Installation Procedures

Connecting Pods

CAUTION:
Using the wrong type of Pod could cause damage to your equipment.
Before connecting a transducer to a Pod, ensure that you are using
the correct type of Pod, i.e. Speed Pod for a Speed Transducer, Depth
Pod for a Depth Transducer etc.
A summary of the connections for the various transducer Pod types, is
given in Figure 2-16 .
Figure 2-16: Pod connections
Note that each Pod has two groups of SeaTALK
supplied with a SeaTALK
you can use the second group to daisy-chain Pods into the system (see
Figure 2-17 ).
Use Figure 2-17 , to determine the optimum connection sequence and the
correct arrangement of cables in the Pod.

Identifying connections

The Pod connectors are color-coded, so ensure that each wire is
connected to the correspondingly-colored connector.
ST290 Instrument System Owner's Handbook
Grey
Red
2
SeaTALK
Black
connectors
(group 1) White
Blue
2
cable connected to one group. If necessary,
6-2-17
Blue
White
2
SeaTALK
Black
connectors
(group 2)
Red
Grey
Transducer
connectors
2
connectors. Each pod is
D5528-1