Basic Operation - Raymarine ST1000+ Quick Reference Manual

ST1000+ and ST2000+ Quick Reference Guide

Basic operation

Extending/retracting the pushrod
Use any of these keys to
extend or retract the pushrod
Entering Auto mode (Engaging the autopilot)
Track mode
Entering Track mode (from Auto or Wind Vane mode)
and
to enter Track mode
then
Press standby or
auto to exit.
Displaying navigation data
(from Auto or Standby modes)
and
Press -1 and +10 together to exit.
or
and
to accept new heading
Autopilot displays
Switching lighting on/off
(from Standby mode only)
Press
Wait 10 sec to return to previous mode.
Auto mode
Course
changes
to port
Returning to previous locked heading
1 sec
Returning to Standby (Disengaging the autopilot)
Entering WindTrim mode
and
Press standby or auto to exit WindTrim mode.
AutoTack
to port
(100˚)
and
to
switch between:
ON
OFF
Making course changes
1˚
or or
10˚
then again to accept heading
WindTrim mode
Using AutoTack
and and
Switching AutoSeastate on/off
(from Auto/Track/WindTrim modes)
and
Press
switch between:
Course
changes to
starboard
AutoTack to
starboard
(100˚)
to
ON
OFF
D3364-2