Raymarine SL70M Owner's Handbook Manual page 70

Chapter 3: Standard Radar Operations
View Target Data
You can toggle the MARPA data box on/off using the MARPA BOX ON/OFF soft
key. This box displays the data for one MARPA target. You can select the
target using the context sensitive cursor or the database list. Alternatively, if
you display the data box when no target is selected, data is displayed for the
last target that had the data box displayed – unless a new target has been
acquired, then the new target data is displayed.
➤ To view (or hide) target data using the cursor:
1. Move the cursor over the target for which you require data. The letters
MARPA and the following soft keys are displayed.
2. Press the MARPA BOX ON/OFF soft key to toggle the data box on/off for the
selected target.The target data box is displayed and the associated target
symbol is identified by a circle drawn around it.
The default soft keys are displayed when you move the cursor away from
the target.
Note: When you select ON , if the data box was already displayed for another
target, it is updated for the selected target.
Figure 3-15: MARPA Target Data Box
➤ To view (or hide) target data using the default soft keys:
1. Press MARPA to display the MARPA soft keys .
2. Press the MARPA BOX ON/OFF soft key to toggle the data box on. The target
data box is displayed and the associated target symbol is identified by a cir-
cle drawn around it. The default soft keys are displayed.
3. Press the MARPA BOX ON/OFF soft key again to toggle the data box off.
➤ To view the MARPA database list and a target data box:
1. Press MARPA followed by the MARPA LIST soft key, the database list is dis-
played.
2. Use the trackpad to select a target, then press the MARPA BOX ON/OFF soft
key to toggle the data box on/off.
D4117_1
3-27
D4119_1