Table of Contents
Advertisement
Chapter 6: Adjusting Autopilot Settings
Setting
2
3
4
Power steer (JoY)
If you have a joystick connected to your Type 100/300 autopilot
system, use this screen to select the required joystick mode of
operation (see table).
Options
OFF
1
2
Drive type (drv oPt)
The drive type setting controls how the autopilot drives the steering
system. You should set the drive type when commissioning the
autopilot.
Options
1 and 2
3
4
5
Effect
Medium trim correction
Rapid trim correction (default)
Very rapid trim correction
Power steer off
1 = Proportional power steer
Proportional power steer applies rudder in proportion to
joystick movement – the further the joystick is held over,
the greater the applied rudder.
2 = Bang-bang power steer
Bang-bang power steer applies continuous rudder in the
direction of the lever movement – to improve control, the
speed of rudder movement changes with the angle of the
lever. For maximum speed, push the lever hardover. If you
return the lever to the center position, the rudder will
remain in its current position.
Not used
Linear drive, rotary drive or I/O (stern) drive
Hydraulic pump or hydraulic linear drive
Constant running hydraulic pump solenoids
69
Hide quick links:
Advertisement
Table of Contents
